Peerless ST650P Tilting Wall Mount for 32" to 50" Flat Panel Displays (Black)
The SmartMount for 32" to 50" flat panel screens provides a versatile and secure solution for professional environments such as boardrooms, hotels and stadiums. This mount offers smooth, continuous one touch tilt, allowing for easy adjustment to achieve the perfect viewing angle without tools. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to two wood studs up to 24" apart, or concrete. For easy installation the mount is preassembled and includes a Sorted-For-You baffle pack with all screen hardware and security fasteners.
Peerless ST650P Tilting Wall Mount for 32" to 50" Flat Panel Displays (Black) Accessories
 Cables To Go - 40315 - 2M (6.5ft) Velocity HDMI Digital Video Cable (Blue)
Samsung LNT4665F 46" 1080p LCD HDTV
Samsung LN46A550 46-Inch 1080p LCD HDTV
StarTech.com 15FT HDMI to HDMI Digital Video Cable ( HDMIMM15 )
Samsung LNT4671F 46-Inch 1080p 120Hz LCD TV
Samsung LN40A550 40-Inch 1080p LCD HDTV
Samsung HPT5064 50-Inch Plasma HDTV
Panasonic TH-42PZ700U 42-Inch 1080p Plasma HDTV
Samsung LN46A650 46-Inch 1080p 120Hz LCD HDTV with RED Touch of Color
Samsung LNT4061F 40-Inch 1080p LCD HDTV
Peerless ST650P Tilting Wall Mount for 32" to 50" Flat Panel Displays (Black) Reviews
Despite my concerns about mounting my precious flat screen on the wall, I agreed when my husband suggested this purchase as it would enhance the look of our television room. We have been using it for a few weeks now with no issues and we do not anticipate any. There was no problem attaching the television (40"). It was very easy to measure out where it needed to be and took just a few minutes to install.
WALL MOUNT SHIPPED IN ONE DAY, RECEIVED THREE DAYS LATER. VERY HAPPY, WOULD ORDER FROM THIS COMPANY AGAIN. HOLDS MY SAMSUNG 46INCH TV PERFECTLY ON THE WALL, FAIRLY EASY TO SET UP.
We were placing our TV to a higher position in the room, and on ladders, it was hard for my wife or I to see back behind the TV to locate the track, and to find and tighten the security screw. You may want a larger drilled (3/16") guide hole, with, what I would percieve no loss of strength. Once up, well, the TV is secure and this is fine for its purpose. Then, when mounted on the back of the TV, came the next adventure of placing brackets to wall fixture.
Okay, so this seemed easy to put up, certainly, from the beginning. I've seen those articulating fixtures, and I gotta believe they may be easier to get access to and mount. Then, with the brackets attached to the TV, they were supposed to adjust for tilt, but I had a dickens of a time getting them to finally loosen up and the one frame piece pulled out from the other frame piece to achieve the tilt (spent over 45 minutes just getting that done). I got the wall fixture mounted, finally. The screwdriver would slip out of the slot without advancing, and I had to resort to wrench or ratchet socket to finally get the screws in.
The instructions recommended a 5/32" drilled guide hole for the screws into the studs, but the screws were quite outsized (I'm guessing to make sure that there is a good solid joint to the stud) and I found it very difficult to screw in those anchor screws.
I took my time on the install, and by myself, was done in about an hour. It's more than enough. Although the picture on the ad is different from the actual mount you will receive,you needn't worry. After much research, I finally settled on this brand of wall mount. No complaints here.
Installation is a snap, instructions are clear, it's well made with all the extra parts you'll need. Got some help to hang the TV and was kicked back watching "No Country for Old Men" on blu-ray in a few more minutes. This mount was used to go on a wood stud wall, 16 inch on center, to hold up a Sharp 42" LCD Aquos set. If you buy one, you won't be singing the blues. Partly because of price, and partly because of the other reviews I had read.
Even someone who hasnt attached things to studs before could do this. Attaching the brackets on the TV was pretty simple too, and I preset the ratchet and set screws to what I thought would be about the right angle. The instructions were very good about how to measure and place the mount on the wall. Mounting the TV on the wall bracket only required me and a friend, and centering on the wall was pretty easy. Getting the set screws on the bottom bracket tightened required a flashlight and a very long screwdriver.
After having my 40" Sony LCD for 3 years I decided to mount it on the wall to save some space in my study to make room for a home theater system. Once I removed those, using the rachet mechanism was very straightforward. Even with the knock on documentation, I think the simplicity and sturdiness of this mount (especially at the price I got it from Amazon) should make this on anyone's short list. They had limited diagrams and forgot to mention you have to take out a locking nut that limited the tilt angles.
My only complaint was with the instructions. That was key, because once its on the wall, its very difficult to get back there to set stuff. Did research on Amazon then went to the Peerless website, which had my TV listed and confirmed that this was the mount for me.
Very simple, sturdy construction with a wide variety of fasteners nicely packaged so I just needed to find the size that fitted the back of my TV. Placing the mount itself on the wall was simple - the kit came with 4 heavy duty lug screws to secure it to the wall.
|
